Features
5 Top DeepEX Features
✓ Design any Excavation in Minutes with all Construction Stages
✓ Structural & Geotechnical Design of Excavations in a Single Suite
✓ Limit Equilibrium, Non-Linear Analysis, Finite Element Methods
✓ Analyze 2D & 3D Excavation Models, Check Steel Connections & more
✓ Review All Results in Graphs and Tables, Optimize all Structural Sections, Export Sketches & Reports & more
methods
Load Methods Effect on Excavations
An Example Why DeepEX Would be Valuable for your Engineering Practice:
Selecting the appropriate surcharge method can have a significant impact in the design of any deep excavation model. Below we present the effect of different external load methods on a cantilever excavation model in the calculation of the wall embedment and the selection of the required structural section. The analysis of the models is performed with our shoring design software - DeepEX.
The following cases are evaluated:
Case 1: Distributed Surface Load – Elasticity Equations (Boussinesq etc.)
Case 2: Distributed Surface Load – 2-Way Distribution Method
Case 3: Distributed Surface Load – 1-Way Distribution Method
Case 4: Distributed Surface Load – Elasticity Equations x2 (AREMA Specifications)
Case 5: 3D Load (Footing) – Distributed Load – Elasticity Equations
Case 6: 3D Load (Footing) – Distributed Load – 2-Way Distribution from Soil Friction
Case 1 - Elasticity Equations: Wall Embedment FS, Wall Moment & Surcharge Pressure Diagrams
Case 2 - 2-Way Distribution: Wall Embedment FS, Wall Moment & Surcharge Pressure Diagrams
Case 3 - 1-Way Distribution: Wall Embedment FS, Wall Moment & Surcharge Pressure Diagrams
Case 4 - Elasticity Equations x 2: Wall Embedment FS, Wall Moment & Surcharge Pressure Diagrams
Case 5 - 3D Load Elasticity Equations: Wall Embedment FS, Wall Moment & Surcharge Pressure Diagrams
Case 6 - 1-Way Distribution from Soil Friction: Wall Embedment FS, Wall Moment & Surcharge Pressure Diagrams
Table: Optimum Wall Embedment and Structural Sections for Each Examined Method
Table
Capabilities/Software Version | DeepEX 2D | DeepEX 3D | DeepEX 3D City |
|---|---|---|---|
Cloud License (Network) | Optional | Optional | ✓ |
Deep Maintenance (12 Months) | ✓ | ✓ | ✓ |
Citywide Damage Assessment | - | - | ✓ |
Integration with Monitoring Data | - | Optional | ✓ |
MSE Walls - Soil Reinforcements | Optional | Optional | ✓ |
Sea Walls - Quay Walls - Wave Pressures | Optional | Optional | ✓ |
Pile Supported Abutments | Optional | Optional | ✓ |
Gravity Retaining Walls | Optional | Optional | ✓ |
3D Finite Element Analysis | - | Optional | ✓ |
2D Finite Element Analysis | Optional | ✓ | ✓ |
Building Damage Assessment | - | ✓ | ✓ |
3D Model Holograms (HoloDeepEX) | - | ✓ | ✓ |
Steel Connections | - | ✓ | ✓ |
Project Cost Estimation | - | ✓ | ✓ |
Design of 3D Excavation Models | - | ✓ | ✓ |
Soil Estimation - Statistical Analysis | ✓ | ✓ | ✓ |
Export Sketches to DXF | ✓ | ✓ | ✓ |
Slope Stability Analysis | ✓ | ✓ | ✓ |
Non-Linear Analysis (Soil Springs) | ✓ | ✓ | ✓ |
Limit Equilibrium Analysis | ✓ | ✓ | ✓ |
Desing of 2D Excavation Models | ✓ | ✓ | ✓ |