Design Reliable Excavation Supports with Ease & Precision
1
About
Design Any Excavation Support System with Confidence
DeepEX enables engineers to design and optimize all types of excavation support systems, including cantilever walls, anchored walls, braced excavations, cofferdams, circular shafts, deadman walls, bin type walls and top-down construction—ensuring safety, efficiency, and cost-effectiveness.
✔ Avoid Costly Design Mistakes – Prevent failures by ensuring accurate and optimized designs for every excavation project.
✔ Save Up to 90% of Design Time – Automate complex calculations and streamline the excavation support system selection process.
✔ Achieve Excellence in Geostructural Design – Ensure safety, efficiency, and compliance with advanced analysis tools.
Secant Pile Walls, Maspeth, New York Project Designed with DeepEX
2
Sign Up
Sign Up
Choice 1
Error
2
Why DeepEX
5 Reasons to Choose DeepEX for Your Next Project
We are here for you
With us, beyond technical support you get expert advice.
Minimize risks and costly mistakes
Stay safe with over 300 expert checks within the software.
Enhance your deliverables
Have time to quickly value engineer projects.
Expand your capabilities
Have all methods at your fingertips, from limit equilibrium to soil springs and 2D & 3D finite elements.
Boost design efficiency
Save up to 90% of your design time based on customer testimonials.
3
DeepEX
Supported Systems for Deep Excavations
DeepEX enables the design of various excavation support systems, tailored to project-specific needs. Here are the main support systems our software can design:
Cantilever Walls - For Open, Unsupported Excavations
- Cantilever walls are an ideal solution when an open excavation is required without lateral support obstructions. DeepEX’s analysis tools allow you to:
Evaluate excavation depths up to 18 feet with ease
Simplify construction without tiebacks or anchors
Optimize wall stiffness to meet project demands
Cofferdams and Cellular Cofferdams - For Watertight Excavations
- Create watertight excavations in water-laden or high-moisture environments with precision:
Model both rectangular and circular cofferdam shapes, ideal for bridge piers and underwater constructions
Explore braced, cellular, or double-walled sheet pile designs for enhanced stability and safety
Use advanced options to consider lateral forces, internal bracing, and dewatering techniques
Anchored Walls with Tiebacks and Rock Anchors
- Achieve maximum support with minimum movement using anchored wall designs. With DeepEX, you can:
Design high-capacity anchor systems for urban or high-stress environments
Minimize ground settlement with accurately placed tiebacks
Customize anchor type, spacing, and prestress levels to achieve optimal stiffness
Braced Excavations - Cross-Lot Internal Bracing
- Cross-lot bracing offers strong internal support for narrow excavations. DeepEX enables you to:
Design and preload struts or rakers for maximum stability
Control wall movements and avoid leakage risks with precise strut placement
Tailor bracing setups for excavations where tiebacks are not feasible
Deadman Wall Systems
- Deadman wall systems provide effective lateral stability for retaining walls by anchoring them to buried structures (deadmen) located away from the excavation site. With DeepEX, you can:
Design deadman walls to stabilize excavation walls without the need for tiebacks within adjacent properties
Customize wall and anchor dimensions based on site-specific loads and spacing requirements
Model soil and load interactions to ensure effective load transfer and excavation stability
Top-Down Excavations with Floor Slabs
- For projects where tiebacks are impractical, the top-down method allows simultaneous construction of floors and excavation:
Plan and sequence complex top-down excavations easily with our intuitive tools
Model concrete slabs and basement floors step-by-step as excavation progresses
Control movements and maintain structural integrity in high-density areas
Circular Shafts
- Circular shafts are ideal for deep excavations requiring support in all directions, often used in tunnels, silos, and elevator shafts. DeepEX allows you to:
Design and analyze circular shaft systems with precision for uniform load distribution
Model various shaft diameters, wall thicknesses, and bracing configurations
Optimize structural stability under complex loads, including groundwater and lateral pressures
4
Unsere Projekte
DIE EINZIGE TIEFBAU-LÖSUNGSSOFTWARE, DIE SIE WIRKLICH BRAUCHEN, GEBEN SIE UNS 30 MINUTEN, UM IHREN ENTWURFSPROZESS ZU TRANSFORMIEREN!
Über 10.000 Projekte, Sprachbefehle, Kostenkalkulation, DXF-Zeichnungen, Gleichungsberichte, 3D-Walers, Grenzgleichgewicht, Bodenfedern, Finite Elemente, VR & Augmented Reality +
New York
Las Vegas
Los Angeles
Florida
Romania
Colombia
Albania
Montreal
Nidal AbiSaab, P.E., Mitarbeiter, RA Consultants
Lance Kitchens, P.E., Vizepräsident, Russo Corporation
"Russo Corporation nutzt das Produktportfolio von Deep Excavation aufgrund der umfangreichen Ingenieurkapazitäten der Programme und der Qualität der Software selbst. Die grafische Oberfläche und Benutzerfreundlichkeit der Software sind hervorragend!"
Conrad W. Felice, PhD P.E., Inhaber und Geschäftsführer, C.W.Felice
Tajudeen Bakare, Leitender Brückenbauingenieur, CT Consultants
"Ich verwende die Software zum Entwerfen von verankerten und freitragenden Spundwandwänden. Das Support-Team beantwortet alle Fragen schnell und verfügt über sehr gute technische Kenntnisse und Hintergrundwissen."
Javier Quiros, P.E., Mott Macdonald
5
Erfahrungsberichte
Was Ingenieure über DeepEX sagen
6
unsere Partner