Tel: 1-206-279-3300

Deep Excavation Software

DeepEX 2017 talk to it and design your deep excavation!

New Deep Foundation Software

DeepFND - Deep Foundation Software, caissons, CFA, drilled piles, driven piles, concrete, timber


New helical pile software HelixPile

3rd Series

Four free deep excavation design webinars.

Optimization of deep excavations.

Mar 11th - 2015

Participation limited 500/webinar

Join now!

Free Helical Pile Design Webinars:

To be announced
Try our free 30 day trials for deep excavation software, for soldier piles, sheet pile walls, tiebacks etc.
Our Software Solutions
DeepFND 2017: Deep Foundation software (NEW!)
DeepEX 2017: Deep Excavation software
Soldier pile walls
Sheet pile walls
Secant pile Walls
Tangent piles
Diaphragm Walls
Soldier and Tremied Concrete
Soil Mix walls
Combined king pile sheet piles
Slope stability
Cost estimation for braced excavations
Waler-Strut Cofferdams
SnailPlus: Soil nailing - soil nailing walls
SiteMaster: Inclinometer software (adopted by Geokon)
HelixPile: Helical Pile Software
RC-Solver: Concrete Design ACI-318, EC2, EC8
Steel-Beam: Steel beam column design, full equations, AISC, EC3

Last Free 1hr Deep Excavation Webinars, Part 3 of 3

3:30 PM (New York), Mar. 16th 2015 REGISTER HERE (event password: join))

(participation is limited to 500/webinar).

3rd part of our webinars will cover optimization and fast design of deep excavations

The 3rd round of webinars puts everything together showing how deep excavation models are setup up. Focus is placed on optimizing excavations and presenting a methodology for fast designs. The presentation will be conducted using our Deep Excavation software DeepEX.

2nd round of webinars covered additional material compared to the 1st webinar

The first round of webinars on the last week of February covered the basics of deep excavation design, including how different beam analysis methods are used. The second round of webinars covered ASD, LRFD, and Eurocode 7 methods for deep excavations. Step by step examples were presented with full calculations.

Over 1300 engineers registered for the 1st series of webinars. If you have missed the first series the material is available here.

Deep excavation design webinar course


Close to 1100 professionals have already signed up. It is a free event, so only webinar this time.

Training sessions by our leading experts

Our geotechnical training webinars get you started right. Deep excavation design requires careful consideration of many factors. For starts a design has to properly evaluate existing site/geotechnical conditions. The right shoring solution has to be selected which also depends on local experience. Shoring design must bring together many aspects of structural and geotechnical engineering. Join our training sessions, gain expert knowledge for deep excavation designs!

This one hour course will cover the following items:

a) Limit-equilibrium and non-linear analysis basics d) Available bracing options
b) Soil property estimation e) Design approach methods (allowable stress, LRFD)
c) Available wall type options f) Example problems and solution approach.

What will I learn?
In this seminar you will learn the different analysis methods for designing deep excavations. You will also learn the basic advantages and limitations of each design approach. You will also learn what kind of geotechnical data are needed and how to get a rough estimate for your project. The course will also cover how to select the proper shoring system, and last real world examples will be covered that show how different design methods can be applied.

Who is teaching this course?

This course is presented by Mr. Dimitrios Konstantakos, P.E. Mr. Konstantakos who has wide international experience and is one of the main developers of the DeepEX (DeepXcav) deep excavation design software that is used by more than 1200 engineers worldwide. You can read more about our people by clicking here!

Trusted by